To connect additional devices
Connect additional devices in the order
shown. The output for each device is
connected to the input of the next, forming a
chain. If you do not want to connect a device,
skip it and continue to the next device.
1
Unplug the power for all devices you
want to connect.
2
If you have not yet connected your
product to a phone line, see
“Connecting
the product to a phone line” on page 5
before proceeding. The product should
already be connected to a phone jack.
3
Open the print cartridge door and swing
open the left side panel to reveal the
phone line sockets.
4
Remove the plastic insert from the
bottom phone socket inside the left side
panel of the product.
4
3
10 Chapter 1 Setting up
ENXC
5
To connect an internal or external
modem on a computer, plug one end of a
phone cord into the product’s “phone”
socket (the socket on the bottom). Plug
the other end of the phone cord into the
modem’s “line” socket.
Note
Some modems have a second “line” socket to
connect to a dedicated voice line. If you have
two “line” sockets, check your computer
documentation to make sure you connect to
the correct “line” socket.
6
To connect an answering machine, plug
a phone cord into the previous device’s
“phone” socket. Plug the other end of the
phone cord into the answering machine’s
“line” socket.
7
To connect a phone, plug a phone cord
into the previous device’s “phone”
socket. Plug the other end of the phone
cord into the phone’s “line” socket.
8
After you have finished connecting
additional devices, plug all of the devices
into their power sources.
9
Close the left side panel and the print
cartridge door. When closing the left side
panel, assure that the phone line is
routed through the upper notch in the
panel.
6
7
5
ENXC
Specifying the fax settings 11
En
glish