Connecting a printer cable to your product
To connect a printer cable to your product, use the following steps:
Note
Windows 95 and Windows NT 4.0 do not support USB cable
connections with the printer. Macintosh computers do not support
parallel cable connections.
1
Open the print cartridge door by pulling the sides of the door
forward as shown.
2
Open the product’s left side panel by pressing the release latch.
3
Plug one end of the USB (1) or parallel cable (2) into the correct
socket inside the left side panel as shown.
4
Thread the cable through the left side panel opening as shown, and
close the left side panel.
Note
If you are using a USB cable, it should be threaded through the upper
notch in the left side panel. If you are using a parallel cable, it should be
threaded through the lower notch.
1
2
3
1
2
4
28 2 Getting started
EN