To install a DIMM
CAUTION
Handling a DIMM without wearing a grounded, antistatic device might
damage the DIMM. Do not touch the contacts on the side of the DIMM.
1
Turn off the power switch (220V product only), and unplug the
printer.
2
Open the print cartridge door and the left side panel.
3
Remove the DIMM from the antistatic bag it came in, grasping the
DIMM on the top edge.
4
Position the DIMM in front of the slot located inside the left side
panel. The gold contacts should be pointing toward the printer and
the cutouts should be at the top and bottom.
1
2
3
4
150 11 HP parts and accessories
EN
5
Carefully press the DIMM into the slot, making sure that it is straight
and pushed in all the way (A). The cam latches, located at the top
and bottom, should rotate inward. To snap the cam latches into
place, press the handles toward each other (B).
6
Close the left side panel and the print cartridge door.
7
Plug the product back in. If you have a 220V product, turn on the
power switch.
A
B
5
7
6
EN
DIMMs (memory or font) 151