Network connection requirements
If you purchased an HP LaserJet 3300 series model other than the HP LaserJet 3320n and are
connecting to a network, you will need a supported HP Jetdirect print server available from HP.
Your choice of print server depends on the type of network connection you have, the number of
devices you want to connect to the print server, and your network protocol.
The following print servers are supported with the HP LaserJet 3300 series and are available from
your local HP dealer or at http://www.buy.hp.com:
Model
Product
No.
Connectors
Firmware
version
Supported protocol
HP Jetdirect 75x
J6035A
Home phoneline 10-Mbits/s
network—with a USB
printer connection.
All
TCP/IP (LPD and 9100)
IPX/SPX Peer-to-Peer
AppleTalk
HP Jetdirect 170x
J3258B (not
supported)
J4102B
10Base-T parallel printer
connection.
All
TCP/IP (9100 only)
IPX/SPX Peer-to-Peer
Novell NetWare
DLC/LLC
HP Jetdirect 175x
J6035A
10/100Base-Tx USB printer
connection.
All
TCP/IP (LPD and 9100)
IPX/SPX Peer-to-Peer
AppleTalk
HP Jetdirect 300x
J3263A
J4101B
10/100Base-Tx (sometimes
called Ethernet and Fast
Ethernet) parallel printer
connection.
H.08.00 or
higher
TCP/IP (LPD and 9100)
IPX/SPX Peer-to-Peer
Novell NetWare
DLC/LLC
AppleTalk
HP Jetdirect 310x
J6038A
10/100Base-Tx USB printer
connection.
All
TCP/IP (LPD and 9100)
IPX/SPX Peer-to-Peer
Novell NetWare
DLC/LLC
AppleTalk
HP Jetdirect 500x
J3265A
BNC, 10/100Base-Tx
parallel printer network
connections—can connect
the product and up to two
other devices to the print
server.
Note: The product is
supported only on Port 1 of
this print server.
J.08.00 or higher TCP/IP (LPD and 9100)
IPX/SPX Peer-to-Peer
Novell NetWare
DLC/LLC
AppleTalk
110 8 Networking
EN
Note
HP recommends against using print servers other than those listed above.
You can check the print server’s firmware revision number by printing a configuration report for the
print server. For instructions, see
To print a Jetdirect configuration page
.
HP Jetdirect 500x
J3264A
Token Ring 3 twisted pair,
(RJ-45) parallel printer
connections — can connect
the product and up to two
other devices to the print
server.
Note: The product is fully
supported only on Port 1 of
this print server.
J.08.00 or higher TCP/IP (LPD and 9100)
IPX/SPX Peer-to-Peer
Novell NetWare
DLC/LLC
Model
Product
No.
Connectors
Firmware
version
Supported protocol
EN
Installing the 310x print server 111