To change the pickup roller
CAUTION
Failure to complete this procedure might damage the printer.
1
Unplug the power cord from the printer, and allow the printer to
cool.
Note
If you have a 220V product, turn off the power switch.
2
Open the print cartridge door, and remove the print cartridge.
3
Find the pickup roller.
4
Release the small, white tabs on either side of the pickup roller, and
rotate the pickup roller toward the front.
5
Gently pull the pickup roller up and out.
1
2
3
4
5
128 9 Cleaning and maintenance
EN
6
Position the new or cleaned part in the slot of the previous pickup
roller. See
Cleaning the pickup roller
for instructions.
Note
Circular and rectangular pegs on each side prevent you from incorrectly
positioning the pickup roller.
7
Rotate the top of the new pickup roller away from you until both
sides snap into place.
Note
Touching the black sponge roller may damage the product.
8
Reinstall the print cartridge, and close the print cartridge door.
9
Plug the printer in to turn it back on. If you have a 220V product,
turn on the power switch.
7
8
9
6
EN
Changing the printer separation pad 129