Starting a copy job
To make copies with your HP LaserJet 3300 series product, use the following instructions:
1
Load your original document onto the flatbed scanner face down (one page at a time) with the
top left corner of the document located in the lower right corner of the glass.
OR
Load your original document face up into the ADF input tray.
2
Press start/copy on the product’s control panel to start copying.
3
Repeat the process for each copy.
For more detailed instructions on loading originals onto the flatbed scanner or into the ADF input
tray, see
Loading originals to copy or scan
.
Note
If there are originals loaded in the ADF input tray and on the flatbed scanner, the product
automatically scans from the ADF regardless of whether there is an original on the flatbed scanner.