Connecting the power cord
To connect your product to a power source, use the following steps.
1
If you have the 220V product, locate the power switch on the back of the product and make
sure the product is switched off.
2
Connect the power cord to the product, as shown (1).
3
Plug the other end of the power cord directly into a grounded AC outlet (2).
4
If you have the 220V product, switch on the power. If you have the 110V product, there is no
power switch. It will automatically power on when it is plugged in.
Note
HP does not recommend the use of uninterrupted power supply (UPS) battery backup devices or
surge suppressors with this product. Many surge suppressors and battery backups can cause print
defects.
1
2
EN
Loading originals to copy or scan 31