Printing on both sides of the media (manual duplexing)
To print on both sides of the media (manual duplexing), you must run the media through the printer
twice. You can print using the normal output path or the straight-through output path.
Hewlett-Packard recommends that you use the normal output path for lightweight paper and use
the straight-through output path for any heavy media or media that curls when printed.
See the following topics for more information:
To duplex manually on lightweight media
To duplex manually on heavy media or card stock (straight-through output path)
Note
Manual duplexing is supported only in Windows.
Manual duplexing can cause the product to become dirty, reducing print quality. If the product
becomes dirty, see
Cleaning and maintenance
for instructions.
50 4 Printing
EN