To duplex manually on lightweight media
Make sure that the straight-through output door is closed.
Access the printer properties (for instructions, see
settings from your computer
). On the Finishing tab, click Print on
Both Sides, select the Flip Pages Up check box, and click OK.
Print the document.
After side one has printed, remove the remaining paper from the
input tray, and set it aside until after you finish your manual
Gather the printed pages, keep the printed side down, and
straighten the stack.
Remove the priority input tray and place the stack of media back in
the input tray. Side one should be facing down with the top edge
toward the printer. Replace the priority input tray.
Click Continue (on screen) and wait for side two to print.
Printing on both sides of the media (manual duplexing) 51