Provides the current values for various network parameters monitored by the print server.
SNMP Set Cmty Name
Specifies whether an SNMP set community name has been configured on
the print server. An SNMP set community name is a password for “write”
access to SNMP control functions (SNMP SetRequests) on the print server.
an SNMP set community name has not been set.
a specific SNMP set community name has been set.
USB Printer 1
Heads the section for the USB printer class descriptor information supplied
by the manufacturer of the printing device. The configuration and diagnostic
pages will be printed on the printing device attached to the print server.
Name of the attached USB printing device, supplied by the manufacturer.
Manufacturer of the attached printing device.
Serial number of the attached printing device.
Current USB communication mode:
IEEE standard protocol, a mode for printers and multifunction
(All-in-One) devices that allows multiple channels of simultaneous print,
scan, and status communication.
HP-proprietary protocol for Multiple Logical Channels, a mode for
printers and multifunction (All-in-One) devices that allows multiple
channels of simultaneous print, scan, and status communication.
two-way printer communication, sending print data
to the printing device and returning status information from the printing
one-way printer communication from computer to
Device not found
connection of a printing device has not been
detected. Check device and cable.
Device not supported
the device connected is not a printer (for
example, a camera).
Total Packets Received
Total number of frames (packets) received by the print server without error.
This includes broadcast, multicast packets, and packets specifically
addressed to the print server. This number does not include packets
specifically addressed to other nodes.
200 16 Troubleshooting network problems