Power/Status light blinking green
The Power/Status light should be ON solid green to indicate that print server power is OK and that
the network cable is connected properly to the print server. If the Power/Status light is blinking
green, please try the steps below and make changes as necessary.
Make sure that the network cable is connected securely to the print server.
Check that the network cable is plugged securely into the hub/switch/router, and that the
connection is set to the correct network speed.
Check that the LINK light is ON for the port on the hub/switch/router to which the print server is
Your network cable may be faulty. Try a different cable.
If the light still does not come on, try a different port on the hub/switch/router.