To connect the product to the
phone line
Use these steps to connect the product to a
single phone jack with one phone line, even if
you have two telephone numbers on that line
and use a ring pattern service (such as
distinctive ring).
1
If a phone cord is plugged into the phone
jack, unplug the cord and set it aside.
2
Open the print cartridge door and swing
open the left side panel to reveal the
phone line sockets.
3
Take the phone cord included with the
product and plug one end of it into the
product’s line socket (the socket on top).
Note
You must use the phone cord that came with
the product in order for the product to
function correctly.
1
3
2
ENXC
Connecting the product to a phone line 7
En
glish
4
Close the left side panel and the print
cartridge door. When closing the left side
panel, assure that the phone line is
routed through the upper notch in the
panel.
5
Plug the other end of the phone cord into
the phone jack on the wall.
If you want to connect additional devices
(such as a phone, an answering machine, or
a modem) to the phone line, see
“Connecting
additional devices” on page 8
.
If you do not want to connect any additional
devices, continue to
“Specifying the fax
settings” on page 11
.
5
4
8 Chapter 1 Setting up
ENXC