To set the number of rings-to-answer
To set or change the number of rings-to-answer, use the following steps:
1
On the control panel, press menu/enter.
2
Using the < and > buttons, select
Fax Setup
, and press
menu/enter.
3
Using the < and > buttons, select
Fax Recv. Setup
, and press
menu/enter.
4
Using the < and > buttons, select
Rings To Answer
, and press
menu/enter.
5
Using the alphanumeric keypad, enter the number of
rings-to-answer, and press menu/enter.
Type of phone line
Recommended rings-to-answer
Dedicated fax line (receiving
only fax calls)
Norway: leave at two rings.
Denmark: leave at two rings or set to one ring.
One line with two separate
numbers and ring pattern
service
Norway: leave at two rings.
Denmark: leave at two rings or set to one ring.
(If you have an answering machine or computer
voicemail for the other phone number, make sure the
product is set to a lesser number of rings than the
answering system. Also, see
“Enabling answer ring
patterns” on page 14
.)
Shared line (receiving both fax
and voice calls) with only an
attached phone
Set to five rings.
Shared line (receiving both fax
and voice calls) with an attached
answering machine or computer
voicemail
Two rings more than the answering machine or
computer voicemail. (You cannot set the product to
more than six rings in Denmark and Norway.)
14 Chapter 1 Setting up
ENXC