To set the time and date
To set or change the time and date, use the following steps. If you need
help entering any information, see
“To enter text from the control panel”
on page 11
.
1
On the control panel, press menu/enter.
2
Using the < and > buttons, select
Time/Date, Header
, and press
menu/enter.
12 Chapter 1 Setting up
ENXC
3
Press menu/enter to select
Time/Date
.
4
Using the < and > buttons, specify either the 12-hour or the 24-hour
clock, and press menu/enter.
5
Using the alphanumeric keypad, enter the current time.
6
If you specified the 12-hour clock, use the < and > buttons to move
the cursor past the fourth character. Select
1
for a.m. or
2
for p.m.,
and press menu/enter.
OR
If you specified the 24-hour clock, press menu/enter.
7
Using the alphanumeric keypad, enter the current date.
•
Make sure you use two digits to specify the month and day (for
example, use “05” for May and “01” for the first day of the month).
8
Press menu/enter.